The instructions on the sublimation transfer paper
1.Use scope: chemical fiber, polyester, including of less than 40% of the cotton blended fabrics and coating of glass, ceramic, metal, wood, etc
2.Storing condition: waterproof, fireproof, avoid bright light (note that sealed when not in use ）
3.Suitable for the printer of our products: Epson 4880、7450、7600、7880、9450、9880、11880…； Roland600、740…;Mutoh 900C…;Mimaki JV33 etc
4、To use special heat sublimation transfer printing ink
Must use the sublimation transfer printing ink, this kind of made of disperse dye inks, the heat transfer temperature will produce sublimation with substrates and dyeing. The sublimation ink is unfavorable and plug nozzle, with good quality color is clear, good stability 。
5、Adjust the suitable concentration of color
Adjust the concentration of the color in the computer, avoid the ink is too dry, need to check the effect of thermal transfer after adjustment 。
6、Adjust the hot-pressing temperature and time of right
Thermal transfer in the temperature range of about 180-180 ℃, time of about 10 to 30 seconds, before the formal mass transfer should make small decision optimum technological parameters 。
7、Thermal transfer thermal surface necessary against
In thermal transfer when hot-pressing, transfer paper, substrates must be close to the surface, there can be no gap, can appear otherwise transfer by fuzzy phenomenon 。
8、The advantages of heat sublimation transfer printing
The sublimation transfer printing graphic colorful, rich, its effect is equivalent to that of the printing, heat sublimation transfer printing is in high temperature heated sublimation thermal transfer ink into objects, which form a colorful image after sublimation. So, thermal transfer products are durable, the image will not fall off, crack and fade 。